Form the terminal for restaurants

The terminal comes from origin with a software for restaurants. To form it, the following instrucions must be followed:

1º Press reset at the back button of the terminal.
2º When the terminal starts to work, press the 'Del' key.
3º The terminal must ask for a  Password:
4º Enter 6169

At this moment, you are in the operating system menu.

(This image correspond to Version number 6, for other versions this menu can be slightly different)

Verify radio parameters

Option 1.
The terminal asks for two numbers.
1^st Number: Model of radio module (91 or 52). If  0 is entered, the terminal will form this parameter by itself. Until 10/07/01 almost every model sold has got 91 as the radio module.

2^nd Number: Communication speed. This value must be 7 or 15.

In the first terminals this values were not configurable. The first value was always 91 and the second always 7. Because of a modification on the antenna's software the second value by default became 15, which provocated an incompatibility. Recent terminals can always be formed with the value 7, but not on the contrary.
This value must agree with the antenna's speed.

Possible values

Radio Module (1^stValue)

Value on the terminal (2^nd Value)

Value in the Antenna

Radiometrix type 91 module

7

40000

Type 91 Radiometrix module

15

20000

Type 52 Radionordic

15

20000

To form the antenna's value the Devkit mut be used. Antenna's value by default is always 20000.

On the terminal, option 2 must be selected and 'Ins' key pressed in order to make the terminal start automatically with the 2 option. 

At this moment, the terminal has got the restaurants program installed.
To form the restaurants' program you must press 96195, in order to have acces to the technical menu.


In this menu's option, you can: 
1 Modify the control number entering the corresponding code: 67145.
2 Change the license number entring the corresponding code:  264264.
3 Change the hardware configurations:
+1 Light (bit 0)
+2 Receiver (bit 1)
+4 Asks for place (bit 2)
+8 Not reset (it does not update the reserved blocks)
+16 Asks for money Visa
+32 Print (Y/N)
+64 Asks for wastes  (S/N)
+128 0-Partial cancellationl; 1-Complete cancellation

By using the value 0, all this fields stay with their original aspect.

4  
Number of retransmitters
+8 Does not protect the keyboard
+16 Direct edition of plus not allowed.
+32 Quantity, 0 by default
+64 Sending a message whenever it starts

5 Put the terminal into an upload PLUS mode. This option can be manual or automatic if the program gives an order by radio to the terminal.  

Homepage

Contacts

Technical Manual

Download

Interconnection Manual

Restaurant terminal